Skip to content

YSASL2-240W-480

240 Watt, Available in 4000K,5000K

Download PDFView
| Download Product Datasheet

Request QuoteRequest QuoteGet a QUICK QUOTE

QUANTITY:

Instant Energy Savings Calculator

Lighting FactsPer Bulb

Estimated Yearly Energy Cost$24.09

Based on 3 hrs/day, 11¢/kWh
Cost depends on rates and use

Life

Based on 3 hrs/day45.66 years

Light Appearance

Warm

Cool

 

^

5700K

Energy Used240 watts

See Below

Replace

updown

80W Fluorescent Fixture

operating for

updown

hours per day

and save over

per year

Description

 

View Detailed ROI Information

 

Product Description

application
Our Super Canopy fixtures can be used for lighting parking decks, outdoor canopies, transportation hubs, hospitals, industrial sites, warehouses, farms, commercial vessels, and marinas. This fixture can also be used as lighting for stairwells, walk-in coolers, kitchens, workbenches, docks, engine rooms, barns, and many other lighting applications.
construction
This fixture is built with a sturdy die-cast aluminum housing and an impact and glare-resistant polycarbonate lens cover. This fixture is tightly sealed to be moisture-proof, dirt-proof, and bug-proof. It is also ingress-protection rated (IP65) and weather-proof for use in damp or wet locations.
optics and leds
Our high-brightness Cree or Similar chips minimize pixilation and provide uniform lens brightness. The high-efficiency LED chips are stacked closely and mounted to a core-circuit board that is self-driven with energy efficient drivers to keep down operating cost. The fixture’s CRI rating is greater than 80. Energy-efficient, high-luminous flux reaches 110+ LMs per watt, and a wide-beam angle of 111° insures maximum light spread coverage.
electrical
This fixture is UL Listed and DLC approved and is engineered to save energy and reduce operating cost. The standard-operating voltage is 100-277 VAC. The average operating life of these fixtures is 50,000+ hours when used under environmental temperatures of -25°C to 40°C
mounting
Pendant Mounting and Direct Surface Mounting.
COLOR AND FINISH
The standard color is Black.

Product Specifications

Structure
Housing Material ALUMINUM
Housing Color WHITE
Lens Material POLYCARBONATE
Lens Color CLEAR
HEAT SINK ALUMINUM
LED Chip Type PHILLIPS OR SIMILAR
Beam Angle
111°
MOUNTING SURFACE MOUNTING
Electrical
Watts 240
Voltage 100-277VAC
DIMMABLE No
CRI 80
Power Factor >0.95
Working Temperature -4° F TO 131° F
PERFORMANCE
LUMENS 33600
LUMENS PER WATT 140
CCT COLOR 4000K,5000K
AVERAGE RATED HOURS 50000
WARRANTY FIVE-YEAR LIMITED (CLICK FOR DETAILS)
Size And Weight
Width
18.03
Length 12.24
DEPTH 4.41
Weight 17.42

 

PACKAGING
Case Pack 1

 

Leave a Reply

Your email address will not be published. Required fields are marked *

s